Now you need to reflash it with an image compatible with the clone. That should solve your No CA found message. When it is finished press flash and browse to the bootloader only image file you want to load ie secondstage-dm800-72.nfi and let it flash - it shouldnt take long, but the dreambox will probably lock up when it is complete, so you need to very briefly remove power, hold down the standby button and reapply power. Power up the dreambox, and you should see a progress bar on the DreamUp software working its way across. You will also need a null modem (or crossover) serial cable to link between the COM port on your PC and the dreambox.įirst connect up the null modem cable between the serial port (COM port) on your PC and the dreambox with the dreambox switched off, run the patched version of dreamup, select which COM port you are using from the dropdown (ie COM1 or COM2 etc) and then click connect. I think it varies per box depending on your SIM but I was able reflash mine with BL72, using a file I found on the web "secondstage-dm800-72.nfi" you may also want to search for 62, 69, and 70 instead of 72 just in case 72 doesnt work on your box. Also get hold of some bootloader only images as uploading by serial takes ages. You need patched DreamUP software which has been hacked to allow you to upload even though the box is not real - I used "DreamUP_patched_by_forhike_and_natas.exe" which seemed to work well.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |